GT HD Gears 4th gear Straight Cut 0.75

687.22

GT HD Gears 4th gear Straight Cut 0.75 Yes you read it correctly straight cut 0.75 fourth gear for TDI and other more powerful engine conversions but in a quiet street cut. They are not cheap but quality never is and these are in my opinion the finest gears available. Straight cut gears produce no axial load. This ‘thrust force’ is generated by the sliding contact between the teeth of helical gears. This lateral force is applied to the mainshaft bearing, which causes it to push forward. This greatly restricts the amount of torque that can be applied through the gears before failures on other components occur. So straight-cut gears effectively allow much larger powertrains to be placed in a vehicle without risking the bearings tearing themselves apart, producing a larger safety factor within the transmission itself.  Ideal for more powerful engines and also long motorway driving. Straight cut gears are deemed to be noisier than helical cut gears however these come with the quiet street cut design there have been no noise complaints have been had by the manufacturers with this cut. F1 Profile straight cut gears were deemed to be noisy so we do not recommend that cut.  We will be testing these soon and comparing them with normal helical cut gears. Please note these are a special order item and so will take usually a week to 10 days to get in stock. Suitable for  094 4speed, 094 5speed and syncro gearboxes.

More info here GT Gears

In stock

SKU: GTGEAR.75S Category:

Description

GT HD Gears 4th gear Straight Cut 0.75 Yes you read it correctly straight cut 0.75 fourth gear for TDI and other more powerful engine conversions but in a quiet street cut.  They are not cheap but quality never is and these are in my opinion the finest gears available. Straight cut gears produce no axial load. This ‘thrust force’ is generated by the sliding contact between the teeth of helical gears. This lateral force is applied to the mainshaft bearing, which causes it to push forward. This greatly restricts the amount of torque that can be applied through the gears before failures on other components occur. So straight-cut gears effectively allow much larger powertrains to be placed in a vehicle without risking the bearings tearing themselves apart, producing a larger safety factor within the transmission itself.  Ideal for more powerful engines and also long motorway driving. Straight cut gears are deemed to be noisier than helical cut gears however these come with the quiet street cut design there have been no noise complaints have been had by the manufacturers with this cut. F1 Profile straight cut gears were deemed to be noisy so we do not recommend that cut.  We will be testing these soon and comparing them with normal helical cut gears. Please note these are a special order item and so will take usually a week to 10 days to get in stock. Suitable for  094 4speed, 094 5speed and syncro gearboxes.

More info here GT Gears

Straight cut come in a range of other ratios if  you require any assistance in deciding which ratio suits you best or you need  more info contact us here. Please note these are a special order item and so will take usually a week to 10 days to get in stock. Suitable for 091, 094 4speed, 094 5speed and syncro gearboxes.

“The finish grinding and attention to detail is unparalleled by any other manufacturer of Porsche or VW gear. “GT VW gears are guaranteed for 50,000 miles when installed in a Van with 2.5 or smaller VW or Subaru normally-aspirated gas engine.

More info here GT Gears

Additional information

Weight 1 kg
Gearbox Type

, , , , , ,

Manufacturer

Reviews

There are no reviews yet.

Be the first to review “GT HD Gears 4th gear Straight Cut 0.75”

Your email address will not be published. Required fields are marked *