Description

12V Underfloor Heating Timer  incl. mounting frame used for our 12V underfloor heating system and perfectly matches the Thermostat in size and appearance. By incorporating the timer into the system it means you can program your underfloor heating to come on when you want it i.e before you wake up so the floor is warm when you get up etc and also to conserveyour battery power   It is a proper 20Amp Multifunctional time relay (timer) designed to implement time functions in industrial and home automation systems and made in the EU so you know its safe.

Time range 1s … 99h59minutes
Resolution 1s or 1min
Time setting T1 and T2 (or only T1)
START/STOP, RESET buttons
PAUSE function
6 operating modes (switching on, disconnecting, cyclical operation, etc.)
Sound alert when finished
High power relay output 20A 4.5kW
Input for triggering START/STOP/RESET commands from outside
Attractive display with graphic icons
The timer is used to switch on/off devices or as an operating time counter. It can work with the time setting only T1 or T1 and T2 in cyclical operation. It has 6 operating modes triggered by the START/STOP, RESET buttons or an external short-circuit signal. Works with ordinary two-pole switches (bistable) or bell impulse switches (monostable).

Technical data
Digital input: triggering commands: START, STOP, PAUSE, RESET by applying a short-circuit impulse to contacts 4-5 minimum pulse time 100ms

Time range:1s … 99h59min

Display method and time settings:

selectable by the user

minutes: seconds (resolution 1 second)

hours: minutes (resolution 1 minute)

Operating mode: delayed switching on, delayed switching off, cyclic switching on with time setting T1 or T1 and T2

Time measurement accuracy: +/- 0.1%

Display: LED, 4 digits, 11mm high, with graphic icons

Control output: relay 20A 4.5kW, durability 100,000 cycles

Additional features:- sound signaling – PAUSE function

Installation:

in a hole with dimensions: 71 x 29mm

Degree and class of protection:IP65/II

Power supply:  12VAC/DC

Power consumption: max. 3VA

Working conditions:-5…60°C; 0 … 85% RH (non-condensing)